Instructions

Instructions below are for one 8 ft. long gallery ledge shelf.

Cutting:

For 8-ft. long frames, no cuts are necessary, although you may wish to square ends up.

Assembly:

  1. Fasten the back 1×4 to the bottom 1×4 using 2-in. screws and wood glue. Pre-drill all screw holes first. (Ana didn’t even cut her boards. All she did was screw the two 1×4’s together with 2-in. screws.)
  2. Tack the 1×2 on to the front using 2-in. finish nails.
  3. Using your choice of paint, basecoat the ledge as desired.
  4. To hang, screw through the back 1×4 into studs in the wall.

Crafter’s Note: These ledges shelves are customizable to any length, but the depth is 5-in. Many of Ana’s readers have made these ledges with a 1×6 or a 1×8 as the bottom baseboard. If you want a shorter ledge, Ana recommends lengths of 24-in., 32-in. and 48-in. With a 24-in. length, you can make 2 shelves from one 1×4. With 32-in. lengths, you can make three shelves out of two 1×4’s. With 48-in. lengths, you can make one shelf out of a single 1×4. You will also need a 1×2.

DIY Wall Ledge Shelves c/o Country Woman’s featured blogger Ana White of Ana White Homemaker.

To read more about Ana and her blog, check out our blog and crafter spotlight.

DIY Wall Ledge Shelves photography by Ana White.

For an illustrated tutorial on this project, print this pdf.

To watch Ana build a ledge shelf, view this video: http://youtu.be/9F5wr-cmalM